SPECIFICATION
Handle type: Cowhorn |
|
Engine Power:2.0 hp (1.47 kW) @ 7000 rpm
|
Start Method: Recoil starter with KAR Start
|
Cutter nylon: Bump & Feed (Ø 2.4 mm)
Cutter blade :3-Blade (255 mm dia)
Bearing of shaft: 5 plane
Drive shaft diameter: Ø 8 mm
|
Dimensions (L x W x H):1824 x 680 x 462 mm |
Fuel: 2-stroke premix (ratio 50:1)
|
|
|
Air filter: Dry type (Foam)
|
Fuel consumption ratio:623 g/kW.h
|
|
TJ0227D Enlarge Image |
With a new brush cutter comes a new engine. The overall performance of the TJ 27 engine gives the confidence to be yet another star. Easy and smooth start is achieved by the introduction of a new KAR starter (Kawasaki Advance Recoil). This provides a simple start-up and reduces pulling force and judder.
The TJ 27 engine has a smooth look, due to its built-in sparkplug, fully covered carburetor, one-piece fan housing and advanced overall shape
|
|
Kawasaki KBH34A Petrol Strimmer
Kawasaki developed the KBH34A specially for intermediate use. It is intended for the more demanding user, without having to revert to the "heavyweights". The use of the KBH34A is mainly for the more woody areas in and around gardens.
Operator comfort has also been enhanced with an excellent
combination of crankshaft balance, piston weight and stroke for maximum
efficiency, reduced inertia and minimised source vibration.
Cowhorn Handle Enlarge Image |
The ergonomically designed double handle system maximizes operator comfort and control of the brush cutter. The one-piece throttle and stop switch improves operator safety by giving immediate access to the stop switch without removing the hand from the grip
|
Nylon Head Enlarge Image |
A new nylon line cutter has been designed to be more user-friendly for easy operation and a long service life.
Line feed will only occur at speeds below 4000 rpm, so the use of nylon line is made more economical. Accidental line feed during operation is ruled out.
|
|
