SPECIFICATION
Handle type: Loop |
|
Engine Power: 1.3 hp (0.96 kW) @ 7000 rpm
|
Start Method: Recoil starter with KAR Start
|
Cutter nylon: Bump & Feed (Ø 2.4 mm)
Cutter blade No
Bearing of shaft: 5 plane
Drive shaft diameter: Ø 7 mm
|
Dimensions (L x W x H):1732 x 356 x 326 mm |
Fuel: 2-stroke premix (ratio 50:1)
|
|
|
Air filter: Dry type (Foam)
|
Fuel consumption ratio:678 g/kW.h
|
|
TJ0227D Enlarge Image |
With a new brush cutter comes a new engine. The overall performance of the TJ 27 engine gives the confidence to be yet another star. Easy and smooth start is achieved by the introduction of a new KAR starter (Kawasaki Advance Recoil). This provides a simple start-up and reduces pulling force and judder.
The TJ 27 engine has a smooth look, due to its built-in sparkplug, fully covered carburetor, one-piece fan housing and advanced overall shape
|
|
Kawasaki KBL 27A Petrol Strimmer c/w 2 year Warranty
Kawasaki KBL-27A. This is one of a range of
professional brushcutters that have been developed
with lightweight
comfort, durability and safety in mind. Cutting is a demanding job at the best of times, so Kawasaki has given
careful thought to every aspect of the design to ensure all necessary
weight has been removed while at the same time retaining built in
strength.
Operator comfort has also been enhanced
with an excellent combination of crankshaft balance,
piston weight
and stroke for maximum efficiency, reduced inertia and minimised source
vibration.
Fixed handle Enlarge Image |
The grip system maximizes operator comfort and control of the brush cutter. The one-piece throttle and stop switch improves operator safety by giving immediate access to the stop switch without removing the hand from the grip.
|
Nylon Head Enlarge Image |
A new nylon line cutter has been designed to be more user-friendly for easy operation and a long service life.
Line feed will only occur at speeds below 4000 rpm, so the use of nylon line is made more economical. Accidental line feed during operation is ruled out.
|
|
